|
|
Build Your Online Product Catalogs?
Mitsubishi servo driver MR-J4-700B
Mitsubishi J4 series SSCNETIII/H interface servo amplifier Mitsubishi MR-J4-700B
Mitsubishi servo MR-E series
It is developed on the basis of the MR-J2S series, maintaining the AC servo series with * * * but limited functions.
From the control mode, the MR-E series can be divided into MR-E-A (position control mode and speed control mode) and MR-E-AG (speed of analog input
Control mode and torque control mode).
The encoder of the matching servo motor of the MR-E series uses the 16384 pulse/revolution resolution incremental position encoder.
Product introduction:
Technical specifications of MR-E servo amplifier
Servo amplifier Servo amplifier model: MR-E - 10A 20A 40A 70A 100A 200A
Power supply voltage and frequency (Note 1) three-phase AC200~230V/50, 60Hz or single-phase AC230V/50, 60Hz (Note 1) three-phase AC200~230V/50, 60Hz (Note 2)
Allowable voltage fluctuation range: three-phase AC170 ¡« 253V/50, 60Hz or single-phase AC207 ¡« 253V/50, 60Hz (Note 1) three-phase AC170 ¡« 253V/50, 60Hz
Allowable frequency fluctuation range is within ¡À 5%
Control mode: sine wave PWM control, current control
Set control mode to input pulse frequency of 500kpps (for differential receiver), 200kpps (for open collector receiving)
Resolution of positioning feedback pulse encoder and servo motor per revolution: 10000p/rev (4 times)
Command pulse ratio electronic gear A/B times, A=1 ¡« 10000, B=1 ¡« 50000,, 1/50
Set 0~¡À 50000 pulses (command pulse unit) within the positioning range
The error is too large ¡À 10 revolutions
Torque limit parameter setting
Speed control mode Speed control range Internal speed command 1:5000
Speed fluctuation rate is less than ¡À 0.01% (load fluctuation 0~* * *) 0% (power fluctuation ¡À 10%)
Torque limit parameter setting
Construction self-cooling, open type (IP00), strong cooling, open type (IP00)
Ambient temperature 0~55 ℃ (no freezing), storage temperature: - 20~65 ℃ (no freezing)
Ambi |
| Company: |
Guangzhou Dongkong Electromechanical Equipment Co., Ltd
|
| Contact: |
Ms. xueli li |
| Address: |
A226, No. 8, Huangcun East Road, Tianhe District, Guangzhou |
| Postcode: |
|
| Tel: |
13570967755 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
